Diversey HIGH MILEAGE UHS Floor Finish, 5 Gallon

Diversey High Mileage, 5-Gallon size, provides top performance in facility high-traffic zones. High 25% solids, low odor formula has excellent gloss build and outstanding durability. High Mileage maintains clear color, no-yellowing. Responds well to buffing or burnishing with high speed equipment. Meets ASTM D-2047 for slip resistance. Mild scent. Extended recoat and strip cycles yield labor savings and overall improved productivity. Quick dry time allows application of up to 5 coats of High Mileage floor polish in one night. Specially designed for high durability to resist dirt, black heel marks and scratches. Use on all types of resilient flooring for high gloss and extended durability in busy, heavy use facilities. May require sealer on highly polished stone, glazed ceramic tile, LVT and some rubber floors. Diversey High Mileage, in a 5-Gallon Envirobox comes ready to apply. Do not dilute.

Coverage: 7500 - 10,000 per 5 Gallons each coat
Shelf Life: 2 years
Dry time between coats: 30-45 minutes
Final Cure time: 24-hours before burnishing
Safety: High Mileage Safety Data Sheet
Technical: High Mileage Technical Data Sheet

Precautions:

• Floor will be slippery when stripped and when polish is wet. Block off area being treated until final cure.
• Do not use on surfaces colder than 50°F (10°C) at 15% relative humidity.
• Do not freeze.
• Not for use on cork, wood or bamboo flooring.

Instructions for Use:
Strip floor with an appropriate floor finish remover, following label instructions, thoroughly rinse and allow floor to completely dry before applying High Mileage floor finish.
 Coat:
 Apply 3 or more medium coats using a clean finish mop or applicator system, until desired gloss level is achieved.
 Allow 30-45 min dry time between coats. Allow 24 hours for final cure before burnishing.

 Maintain:
 Dust mop or sweep. Clean floor with a mop or auto scrubber using an appropriate floor cleaning solution in accordance with label instructions.
 If desired, dry buff using medium to aggressive pad and 100-500 rpm equipment. Ultra-high speed burnish using a medium aggressive pad and 2000+ rpm equipment.

 Recoating:
 Dust mop or sweep. Clean floor with a mop or auto scrubber using an appropriate floor cleaning solution in accordance with label instructions.
 Apply 1 - 2 uniform coats with a clean finish mop or floor finish applicator system. Allow to dry 24 hours before burnishing.

 Removal:
 Remove with an appropriate stripper following label instructions.