Clean and remove grout haze from ADURA®Flex glue down LVT when installed with ADURA acrylic grout.
Mannington Ultra Grout & Tile Cleaner, 32 oz, provides the best performance for removing grout haze, as well as grease, soap scum, permanent marker and mineral deposits. This Grout & Tile Cleaner is water based and non-acidic so it is safe for use on Adura® Flex, granite, natural stone, polished stone, tile, glass and masonry. As a multi-purpose cleansing solution, Ultra Grout & Tile Cleaner helps clean the floor after installation is complete to remove grout haze and other dirt from floor.
- Fast working
- Safe on most surfaces
- Water-based
- Non-acidic
- Removes ADURA Acrylic Grout haze
- Removes some epoxy, urethane, and cement grout haze
- Cuts through grease, fingerprints, dirt, and grime
SAMPLE TEST RECOMMENDED: Due to differences in surfaces it is important to test, prior to full use, in several inconspicuous test patches to assure maximum performance and suitability of the product for the intended use.
DIRECTIONS:
Use undiluted for difficult stain removal or dilute up to 5-1 with clean water depending on the severity of the job. Apply cleaning solution, diluted or undiluted, with a spray, towel, mop or brush directly to the surface and allow to sit for 3-20 minutes depending on the severity of the job and the material that needs to be cleaned from the surface. Start with shorter dwell time and repeat as needed for a cautious approach. Wipe dry.
For grout haze removal allow cleaning solution to sit until the grout begins to loosen. Agitate periodically using a soft white brush to help loosen grout haze. Rinse with clean water to remove all grout haze and residue from the surface. If first application does not remove desired substances, repeat until the substance is lifted.
For more difficult jobs agitate cleaning solution by scrubbing. Use a soft white brush on most surfaces. Use a more aggressive brush with care as the bush may damage the flooring material if too harsh. Cleaning solution can dwell on surface for up to 20 minutes. Wipe clean using a clean dry microfiber cloth or towel. No rinsing is necessary for most jobs.
COVERAGE: Coverage varies but under typical use Ultra Grout & Tile Cleaner will cover approximately 40 - 88 Sq. ft. per quart. (3.71 -8.17 square meters per .946 Liters).
SAFETY DATA SHEET:
Mannington Ultra Grout & Tile Cleaner SDS
TECHNICAL DATA SHEET:
Mannington Ultra Grout & Tile Cleaner InformationPRECAUTIONS: Wear protective gloves and eye/face protection. Use in a well ventilated area. Review SDS sheet prior to use.