Ecore E-Grip III Adhesive Cartridge, 10oz

Convenient and easy to use E-Grip III Adhesive Cartridge is 10-ounces and fits into a standard caulk gun. Use EGrip-III for glue-down installation of Ecore rubber and sheet vinyl commercial floors as specified. This single component polyurethane flooring adhesive has excellent adhesion, is low odor, zero-VOCs, solvent-free, & antimicrobial. E-Grip III Cartridge may be used alone or to supplement the 2-gallon or 4-gallon pail of E-Grip III Adhesive on an Ecore floor installation. EGrip 3 has excellent adhesion to elastomers, concrete, and wood subfloors in both indoor and outdoor installations and improved tack properties to keep seams tight. Adhere to specifications for trowel notch, substrate moisture limits, floor/ambient temperature range, working and open times to achieve best results. Complete installation instructions can be found on the ecore website in the Ecore Flooring Technical Manual that corresponds with your floor.

E-Grip III SDS
E-Grip Product Information Sheet

Coverage Rates:
120 sf/gallon with 1/16-inch by 1/32-inch by 5/64-inch U notch trowel
95 sf/gallon with 1/16-inch by 1/16-inch by 1/16-inch square notch trowel
60 sf/gallon with 1/8-inch by 1/8-inch by 1/8-inch square notch trowel

RH Limit: 85% per ASTM F-2170
Apply at 40°F-100°F
Working time - 30-40 minutes
No mixing required.
Moisture-cured, no-mix, non-sag, permanently elastic formula.
Use Indoor & Outdoor on Ecore rubber & heterogeneous sheet vinyl floors, as specified.
Freeze-thaw Stable (freezing will not harm adhesive)
Shelf life - 1 year
Meets Collaborative for High Performance Schools (CHPS)
Meets Low-Emitting Materials criteria (CA Section 01350)