Ecore E-Grip III Adhesive, 2 gal pail

E-Grip III Adhesive by Ecore, in a 2-gallon pail, is a one-component polyurethane adhesive that provides excellent adhesion to elastomers, concrete, and wood substrates in both indoor and outdoor applications. Use for installing Ecore rubber composition and heterogeneous vinyl sheet commercial floors as specified. E-Grip 3 flooring adhesive has improved tack properties to keep seams tight. Moisture-cured formula requires no-mixing, will not sag and has a permanently elastic formula. No mixing required. Coverage will vary based on substrate, flooring material and trowel notch size/shape. For successful results, adhere to adhesive use instructions in the Ecore Technical Manual for your specific floor. Reference product label, safety data sheet, and product information sheet for all safety precautions and use information- E-Grip III Safety Data Sheet  ,  E-Grip Product Information Sheet.

Coverage Rates based on trowel notch:
120 square feet/gallon: 1/16-inch by 1/32-inch by 5/64-inch U notch trowel
95 square feet/gallon: 1/16-inch by 1/16-inch by 1/16-inch square notch trowel
60 square feet/gallon: 1/8-inch by 1/8-inch by 1/8-inch square notch trowel

• Zero-VOC. Low odor. Antimicrobial. Solvent-free.
• 85% maximum RH per ASTM F-2170
• Freeze-thaw Stable (freezing will not harm adhesive)
• Application temperature between 40°F-100°F
• Working time is 30-40 minutes
• Meets Collaborative for High Performance Schools (CHPS)
• Low-Emitting Materials criteria (CA Section 01350)
• Ecore Egrip 3 can also be purchased in a 4-gallon pail and a 10.1-ounce cartridge.
• Shelf life is 1 year