XL NORTH XL25 Gloss Acrylic Floor Finish, 1 Gallon

Commercial HIGH GLOSS acrylic floor polish for luxury vinyl and other resilient floors, XL North XL25 Gloss Floor Finish, 1-gallon, is a cross metal interlinked pure acrylic finish, 25% solids, provides durable floor protection without creating unwanted build-up. Infused with Intersept®, an EPA reg anti-microbial. Non-slip fast drying premium floor finish. Can be high speed burnished. Provides excellent scuff and stain resistance.

Use on VCT, LVT, linoleum, terrazzo, rubber, asbestos tile, asphalt tile, concrete and other resilient floors. Non-resilient floors such as marble may require testing for adhesion.
Coverage is 2000-3000 sf per gallon single coat.
Safety Data: XL NORTH XL25 Gloss Floor Finish SDS
Technical Data: XL NORTH XL25 Gloss Floor Finish Tech Data Sheet

DIRECTIONS:
FLOOR PREP:
Seal off areas to be stripped or finished. Prior to application, floors should be completely stripped of old finish and neutralized. The surface should be completely dry before applying first coat and all subsequent coats. Do not use an air mover or fan directly on the flooring to dry finish, always use indirectly.
INITIAL COATING:
Using a microfiber pad or clean mop on unsealed floors, apply 4-5 coats. Apply additional coats until the desired gloss is obtained. Allow a minimum of 30 minutes drying time between coats. Temperature, humidity and ventilation may affect drying time. Burnishing is not required but is acceptable if higher shine is required. Allow the finish to cure for 24 hours before burnishing or putting any heavy furniture on the floor.
RE-COATING:
Seal off area and apply 1-2 thin, even coats of finish using a microfiber pad or clean mop.