XL NORTH XL UF Gloss Urethane-Fortified Acrylic Floor Finish, 1 Gallon

Protect high traffic areas with XL North XL UF Urethane Fortified Floor Finish, 1-gallon, for extended-wear and ultra durable protection without creating unwanted build-up. Formulated with urethane for increased scuff and scratch resistance and exclusive micro-molecular technology that allows easy maintenance and exceptional film clarity. Provides a HIGH GLOSS finish. Infused with Intersept®, an EPA reg anti-microbial. Non-slip fast drying premium floor finish. Commercial use in high traffic facilities. Reacts well to high speed burnishing.

Use On: VCT, LVT, linoleum, terrazzo, rubber, asbestos tile, asphalt tile, concrete and other resilient floors. Non-resilient floors such as marble may require testing for adhesion.
Coverage: 2000-3000 sf per gallon single coat.
XL NORTH XL UF Gloss Floor Finish Product Information Sheet
XL NORTH XL UF Gloss Floor Finish Safety Data Sheet

DIRECTIONS FOR USE:
FLOOR PREP:
Seal off areas to be stripped or finished. Prior to application, floors should be completely stripped of old finish and neutralized. The surface should be completely dry before applying first coat and all subsequent coats. Do not use an air mover or fan directly on the flooring to dry finish, always use indirectly.
INITIAL COATING:
Using a microfiber pad or clean mop on unsealed floors, apply 4-5 coats. Apply additional coats until the desired gloss is obtained. Allow a minimum of 30 minutes drying time between coats. Temperature, humidity and ventilation may affect drying time. Burnishing is not required but is acceptable if higher shine is required. Allow the finish to cure for 24 hours before burnishing or putting any heavy furniture on the floor.
RE-COATING:
Seal off area and apply 1-2 thin, even coats of finish using a microfiber pad or clean mop.